construction debris

 

 

 

demolition debris

 

 

 

construction waste

 

 

 

Shamrock Environmental Landfill provides management services and environmentally secure disposal of Construction and Demolition debris (C&D).

 

For our clients in the construction and demolition industries, we pledge prompt, cost-effective service and an environmentally sound method of waste disposal. Shamrock provides the best option for waste generators who are concerned where their waste is disposed and who desire to minimize their environmental risk.

 

The liner system at Shamrock Environmental Landfill was constructed with a 60-mil HDPE and 2 foot clay composite liner which goes well beyond Minnesota requirements for C&D landfills and meets Federal Subtitle D standards. All leachate is collected, tested, and properly disposed of in an approved facility.

 

Shamrock also conducts groundwater monitoring to test water quality. These tests provide a method to constantly monitor the ground water entering the facility and its quality leaving the facility, thus providing needed information as to whether a liner system is performing properly. Shamrock personnel are all certified C&D landfill operators.

 

A series of inspections ensure that only acceptable waste is deposited in the landfill. First, incoming loads are inspected at the check-in facility. Next, personnel inspect materials as they are unloaded on the working face. Finally, equipment operators inspect loads as they are spread and compacted. Any non-acceptable wastes are refused acceptance and returned to the generator.

 

A computerized tracking system documents waste origin and placement. Shamrock issues a ticket for every load disposed at the landfill.

 

State, County, and City officials conduct site inspections to ensure environmental compliance. Shamrock’s compliance record is flawless—we are proud to have never received a violation at any of our facilities in our entire operating history!